Recommended
Uses:
Cabot Semi-Transparent Stains are deep-penetrating, linseed oil-based
stains that beautify and protect exterior wood. These lightly-pigmented
stains enhance the natural beauty of the wood by allowing the grain,
texture and color variations within the wood to show through. They are
water repellent and, when properly applied, won’t crack, peel
or blister. Cabot Semi-
Transparent Stains are for use on exterior wood siding, shingles, shakes,
log homes and roofs. They are especially effective on rough-sawn surfaces,
and excellent results are obtained on premium grade lumber such as cedar,
fir, pine, cypress, spruce, redwood and plywood panel siding.
Composition:
Lightly pigmented, deep-penetrating, natural linseed oil-based stain.
Finish:
Dries to a natural, flat finish.
Coverage:
On smooth surfaces, approximately 400-600 square feet per gallon; on
rough surfaces, 150-250 square feet per gallon. These rates will vary
depending upon the porosity of the surface.
Restrictions:
Do not apply over previously painted or sealed surfaces, metal, masonry
or adjacent to fresh stucco. For these areas and on trim, The Finish
House & Trim Paint and Cabot PRO.V.T.® Solid Color Acrylic Stains
are recommended. When previous stain cannot be removed completely, Cabot
PRO.V.T.® Solid Color Acrylic Stains are recommended. Do not use
on decks. Cabot Decking Stains, as well as Cabot Solid Color 100% Acrylic
Decking Stains #1800, should be used. Do not thin this product. Not
intended for interior surfaces. For exterior use only. Do not intermix
with Cabot’s Water-base Semi-Transparent Stain.
Categories
Your cart
Authentication
News
