Paint
Paint
DiscountPaint.net
The Best Place on the Net to Buy Paint and Painting Supplies
Store Front Company Policies Contact Us Search
Paints Painting Supplies Decorative Paints
Printable version 
 
     Categories
MANUFACTURERS
DECORATIVE PAINTS
PAINTS
PAINTING SUPPLIES
PAINT COLOR SAMPLES
COLOR EXPERT
COLOR MATCHING
VOC COMPLIANT PRODUCTS
FREE SHIPPING SPECIALS
OVERSTOCK SPECIALS


     Bestsellers
1. UGL 12512 ZAR 125 BLACK WALNUT WOOD STAIN SIZE:QUART.
2. UGL 12212 ZAR 122 MEDITERRANEAN WOOD STAIN SIZE:QUART.
3. UGL 13512 ZAR 135 CHARCOAL WOOD STAIN SIZE:QUART.


     Manufacturers
MODERN MASTERS
HAMMERITE
ZINSSER
MAJIC PAINTS
UGL
ADVANCE PROTECTIVE PRODUCTS
MINWAX
XIM
SHEFFIELD
OKON

Other manufacturers...


     Special
Gift certificates
Special offers

     Help
Contact us
Privacy statement
Terms & Conditions
About Us
Free Shipping
Customer Service
Repainting your Exterior Home
Interior Paint Project
Why Use Color Samples Before You Paint?
Blog
Sitemap

  DiscountPaint.net :: MANUFACTURERS :: UGL :: UGL 11806 ZAR 118 DARK MAHOGANY WOOD STAIN SIZE:1/2 PINT.


  UGL 11806 ZAR 118 DARK MAHOGANY WOOD STAIN SIZE:1/2 PINT.
UGL 11806 ZAR 118 DARK MAHOGANY WOOD STAIN SIZE:1/2 PINT. 

ZAR® Wood Stain
ZAR® Wood Stain wipes on like furniture polish to add rich, uniform color to wood. ZAR®'s controlled penetration brings out the natural beauty of a variety of wood surfaces without streaks or lap marks.
ZAR® Wood Stain is perfect for cabinets, paneling, antiques, wood trim and unfinished furniture. ZAR® can be applied over painted and previously varnished surfaces for a beautiful wood grain effect and ZAR® Wood Stain is recommended by leading manufacturers of fiberglass, steel and Masonite® doors.

  • Stains and seals with "Controlled Penetration"
  • Wipes on to produce a uniform color
  • Leaves no lap marks or streaks
  • Can be applied to metal or previously painted or varnished surfaces to achieve a wood grain effect
  • The ideal stain for fiberglass, steel or Masonite® doors
  • Coverage - up to 400 square feet per pint

DESCRIPTION
ZAR Wood Stain wipes on like furniture polish to add rich, uniform color to wood. Its controlled penetration assures uniform color tone without streaks or lap marks.

ZAR Wood Stain can be applied to all varieties of wood, both unfinished and previously finished, and can be used on surfaces that have been previously painted or varnished to achieve a wood grain effect. ZAR Wood Stain brings out the beauty of wood on interior surfaces such as cabinets, floors, paneling, antiques, doors, wood trim and unfinished furniture. ZAR Wood Stain is available in 19 wood tones plus Country White in halfpints, pints, quarts and gallons. Tint Base is available in quarts and gallons.

STEEL AND FIBERGLASS DOORS
In addition to wood doors, ZAR Wood Stain is excellent for making steel and fiberglass doors look like real wood.

FIBERGLASS DOORS
Because fiberglass doors have a wood grain embossed in their surface, ZAR Wood Stain can be used to quickly and easily bring to life the door’s real wood look.

SURFACE PREP NEW WOOD
Make sure the surface is clean and dry. Sand with #120 or #150 grit sandpaper until the surface feels smooth. Remove sanding dust with a tack rag or a cloth dampened with paint thinner.

APPLICATION
Stir ZAR Wood Stain thoroughly before and during application. Using a clean lint-free cloth, wipe ZAR Wood Stain on evenly in the direction of the grain of the wood. Wipe off excess wood stain using a clean lint-free cloth. Let the stain dry for 3 to 4 hours. If greater depth of color is desired, apply a second coat of ZAR Wood Stain and repeat drying and buffing steps. Allow 3 hours drying time. Protect your stain by top coating with ZAR Polyurethane

GRAINING OF PAINTED SURFACES
Remove all dirt, oil, wax, polish and grease with turpentine or suitable solvent. Sand to remove gloss and wipe away sanding dust with a tack rag. Wipe on ZAR Wood Stain with a lint-free cloth, and then use a brush, cloth or graining tool to achieve a wood grain effect. Allow ZAR Wood Stain to dry at least 48 hours before applying a protective coat of ZAR Polyurethane Clear Wood Finish. Note: Stains and clear finishes will not adhere to shellac or lacquer. They should be removed before refinishing.

COVERAGE
ZAR Wood Stain covers up to 400 square feet per pint depending on porosity of the wood.

DIRECTIONS
To apply, you can remove the door from its hinges by removing the hinge pins, or you can work with the door mounted. In either case, make sure the surface is clean and dry before beginning. It is helpful to wipe the surface lightly with a cloth dampened with denatured alcohol or paint thinner to remove dust particles. Stir ZAR Wood Stain thoroughly. Using a lint free cloth, wipe on a light, uniform coat of ZAR Wood Stain. Use a dry soft-bristled brush to remove any streaks and enhance the wood grained look of the door. If your first coat is too light, wait 48 hours and wipe on a second coat. As with the first coat, remove any streaks with a dry soft-bristled brush. Do not sand between coats. Sanding can damage the fiberglass surface. After allowing the stain to dry 48 hours, complete the job by applying ZAR Polyurethane Clear Wood finish. For the exterior side of doors exposed to prolonged or extreme sunlight, apply ZAR Exterior Polyurethane. For doors protected by overhangs and porches, and for the inside of doors, apply ZAR Interior Polyurethane. Use a quality, natural bristle brush or use ZAR Polyurethane spray cans. If using a brush, apply a thin coat of ZAR Polyurethane by flowing on the material in the direction of the grain. If using ZAR Polyurethane Spray, apply a thin even coat. Apply a second coat, if needed, after 12 hours. Allow 24 hours drying time before rehanging the door.

STEEL DOORS
Create a wood grain effect on steel doors with ZAR Wood Stain and the ZAR Wood Graining Tool. ZAR is the only wood stain widely available with enough pigment and body to be used as a graining medium.

DIRECTIONS
Before you begin to grain your door, practice on a painted metal or painted wood surface until you feel comfortable with the graining tool. When you begin to grain your door, wipe a thin, uniform coat of ZAR Wood Stain on the surface and let stand for about 15 minutes. Beginning at the top of the surface to be grained, draw the graining tool down, moving it at a constant speed. While drawing the graining tool, use a rocking motion to create a natural heartwood appearance. Do not allow the grooves of the graining tool to flood with stain. If you are not satisfied with your results, wipe off what you have applied using a cloth dampened with mineral spirits and start over. After allowing at least 48 hours drying time, apply a thin, uniform coat of ZAR Wood Stain over the newly grained surface in the direction of the grain. The darkness of the finish depends on the amount of stain applied. Allow this coat to dry thoroughly for at least 48 hours. Apply ZAR Polyurethane Clear Wood Finish. For the exterior side of doors exposed to prolonged or extreme sunlight, apply ZAR Exterior Polyurethane. For doors protected by overhangs and porches, and for the inside of doors, apply ZAR Interior Polyurethane. Allow the clear finish to dry for 24 hours before putting the door into service.

 
   

Details
 
SKU: 7994111806
Weight1.00 lbs
Retail Price: $7.63
Price: $5.11

Options
 
Quantity

 Add to cart 
        


  33%
 

  Send to friend
Your name: *
Your e-mail: *
Recipient's e-mail: *

 Send to friend 
 

  Detailed images
UGL 11806 ZAR 118 DARK MAHOGANY WOOD STAIN SIZE:1/2 PINT.

 

  Recommended products list
  • UGL 12512 ZAR 125 BLACK WALNUT WOOD STAIN SIZE:QUART.
  • SYNKOLOID 100-8 INTERIOR SPACKLING SIZE:9 OZ.
  • SHURLINE 03410C 3" TRIM ROLLER REFILLS PACK:2 PCS.
  • 3M 06964 SUPERFINE 4 1/2" X 5 1/2" X 3/16" CONTOUR SOFTBACK SANDING SPONGE PACK:250 PCS.
  • HOWARD RF2016 M PINE RESTOR A FINISH SIZE:16 OZ.
  • OLD MASTERS 41301 FRUITWOOD PENETRATING STAIN SIZE:1 GALLON.
  • OLD MASTERS 50101 STAIN CONTROLLER SIZE:1 GALLON.
  • ASM 245525 REPAIR KIT FOR ZIP SPRAY 1900
  • MODERN MASTERS ME704-GAL BLACK CHERRY METALLIC PAINT SIZE:1 GALLON.
  • WOOSTER RR113 JUMBO KOTER SUPER DOO-Z FRAME AND ROLLER COVER SIZE:4.5" PACK:12 PCS.
  •  
     

     
         Your cart
    Cart is empty

    View cart
    Checkout


         Authentication
    Username

    Password

    Log in
    Register
    Recover password

    If Javascript is disabled in your browser click here


         News
    04-06-2012
    Product Availability Time:To ensure that all orders are inspected before shipment we have a cut off time of 7:00 am (Eastern Standard Time). Orders must be placed complete by this time to be guarantee same day shipment. Orders placed after 7:00 am will be ship next day. Orders received on Friday, Saturday or Sunday will be shipped on the following Monday. Or major holidays will be processed the next business day.

    Previous news



     
     
    We accept major credit cards
    Credit Cards Logo
     
    Home - Store - Company - Search - Policies - Contact Us - Site Map - Directory - Resources - Blog - News
    Painting Supplies
    - Decorative Paint - Metallic Paints - Paint - Paint Removers & Sealants - Stain - Finish
    Paint
    - Metallic Paint - Venetian Plaster - Metal Paint - Ready Strip - Paint Supplies - Minwax - Paint Store - Paint Colors
     
     
    Maintained by WebSearchEngineMarketing.net


    © Copyright 2002-2013 DiscountPaint.net - All Rights Reserved