Paint
Paint
DiscountPaint.net
The Best Place on the Net to Buy Paint and Painting Supplies
Store Front Company Policies Contact Us Search
Paints Painting Supplies Decorative Paints
Printable version 
 
     Categories
MANUFACTURERS
DECORATIVE PAINTS
PAINTS
PAINTING SUPPLIES
PAINT COLOR SAMPLES
COLOR EXPERT
COLOR MATCHING
VOC COMPLIANT PRODUCTS
FREE SHIPPING SPECIALS
OVERSTOCK SPECIALS


     Manufacturers
MODERN MASTERS
HAMMERITE
ZINSSER
MAJIC PAINTS
UGL
ADVANCE PROTECTIVE PRODUCTS
MINWAX
XIM
SHEFFIELD
OKON

Other manufacturers...


     Special
Gift certificates
Special offers

     Help
Contact us
Privacy statement
Terms & Conditions
About Us
Repainting your Exterior Home
Interior Paint Project
Why Use Color Samples Before You Paint?
Blog
Sitemap

  DiscountPaint.net :: MANUFACTURERS :: AKZO NOBLE PAINTS LLC :: FLOOD FLD142 SWF-SOLID DEEP BASE 250 VOC SIZE:5 GALLONS.

  FLOOD FLD142 SWF-SOLID DEEP BASE 250 VOC SIZE:5 GALLONS.
FLOOD FLD142 SWF-SOLID DEEP BASE 250 VOC SIZE:5 GALLONS. 

Flood SWF-SOLID Color Wood Finish is a premium finish for new wood and for recoating old applications. SWF-SOLID is fortified with E-B Emulsa-Bond to provide unsurpassed adhesion to vertical and horizontal exterior substrates where other products ultimately fail or require extensive preparation and priming. SWF-SOLID blends acrylic and urethane technologies to provide reliable adhesion, abrasion-resistance and flexibility. SWF-SOLID delivers high traffic performance on deck surfaces and is the perfect choice for long- asting beauty on siding. SWF-SOLID is guaranteed not to peel or blister.

BASIC USES
• For exterior use only
• New or weathered exterior wood
• Previously coated exterior surfaces
• Siding (new or weathered, including: untreated solid wood, primed and previously finished fiber cement board and plywood, including T1-11, and aluminium)
• Decks, docks and other horizontal surfaces including PTW, cedar, redwood, hardwoods and composite decking
• Fences and other vertical surfaces
• Trim boards and outdoor wood furniture
• Weathered vertical masonry including stucco, painted block, EIFS, etc.

SURFACE PREPARATION
GENERAL DIRECTIONS:
1. Surfaces to be coated should be clean and dry before applying SWF-SOLID Solid Color Wood Finish.
2. Sand, scrape or wire brush to remove all loose flaking or peeling finish
3. Pressure wash to remove excess dirt, chalk, oxidation and other surface contamination.
4. Mildew - A mildew-resisting component has been incorporated into this product to make its dry film mildew resistant, however, no coating is mildew proof. Before coating, remove mildew by scrubbing the surface with a mixture of four ounces of non-ammonia detergent (TSP), one quart of household bleach and three quarts of water. Allow this solution to remain on the surface for 10-15 minutes, then rinse thoroughly. Repeat until mildew is completely removed. Wear protective glasses or goggles and waterproof gloves when using this solution. Quickly wash off mixture that touches your skin. Allow 2-3 days dry time after cleaning before finishing or when wood has a moisture content of <15%.

NEW WOOD SURFACES:
The ideal time to finish new wood is one to three months after installation. Many new wood surfaces can have a hard, shiny condition called mill glaze that prevents maximum penetration and adhesion of a finish. All new wood, especially decks, should be prepared with Flood Wood Stripper or FloodPro® Stripper/Cleaner to reduce mill glaze, remove natural wood chemicals and other factory applied sealers to open wood and allow maximum penetration.

WEATHERED WOOD OR PREVIOUSLY COATED SURFACES:
Follow "General Directions" for surface prep.

HIGH EXTRACTIVE WOODS: (i.e. red cedar, redwood)
"Extractives" or tannins are natural wood chemicals that give wood its color. These chemicals can "bleed" into a topcoat and cause discoloration of the finish. Use Flood Wood Cleaner or Flood Dekswood® (diluted with water from 1:1 for redwood to 4:1 for cedar) to remove tannin stains and clean the surface prior to coating. To prevent tannin bleed, use an oil-based exterior stain blocking primer, designed to seal exterior wood to control tannin and knot bleeding, prior to application. Alternatively, apply the first coat of Flood SWF-SOLID Wood Finish. Allow the first coat to cure 7 days prior to application of the second coat.

COLOR SELECTION
• Before starting job, test your color choice on a small area
• Buy sufficient product for the whole job and box or intermix all product together before staining to avoid color variance
• DO NOT USE TINT BASES UNTINTED
NOTE: Custom tint using colorants that are approved for exterior use only.

APPLICATION TOOLS
• Apply FloodPro Solid Color Finish with a synthetic brush, 3/8" - 3/4" nap, tight knit synthetic roller cover, stain brush/pad or airless sprayer
• Spray equipment .015 - .019 fluid tip/1,500-2,100 psi fluid pressure

APPLICATION
CAUTION: Surfaces are slippery when wet. Use caution when walking on wet surfaces during application.
1. Clean as directed under "Surface Preparation".
2. Cover everything you do not wish to coat including plants and shrubs.
3. Apply between 50º and 80º F. Do not apply in direct sunlight, on hot
surfaces or if cold and/or wet weather is expected within 48 hours.
4. Mix product thoroughly before and during application. Do not thin.
5. For color uniformity, use a larger container (ex. 5 gallon bucket) to intermix all product to be used in one area.
6. Apply an even coat of SWF-SOLID Color Wood Finish avoiding
heavy application.
7. Always work the entire length of a deck board or horizontal siding to a logical break, such as a window or door frame.
8. Vertical siding should be coated from top to bottom.
9. If spraying on product, always back brush or back roll material to provide maximum substrate coverage, penetration and uniform appearance.
10.If additional coats are required, it may be applied 3-4 hours after initial application.

COVERAGE RATES
• Smooth/moderately porous surfaces: 350 - 400 sq. ft/gal
• Rough/weathered/porous surfaces: 250 - 350 sq. ft/gal
NOTE: Actual coverage rates may vary depending upon substrate type and/or conditions as well as application method.

MAINTAINING SWF-SOLID COLOR FINISH
Surfaces with harsh exposure to sun, weather or foot traffic will show wear more quickly than other areas - if this happens, clean affected areas and recoat as necessary.

CLEANUP & STORAGE
• Cleanup with soap and water.
• If SWF-SOLID is allowed to dry on tools, remove with
paint remover.
• Store unused portion in a sealed container to prevent gelling.
• KEEP FROM FREEZING

 
   

Details
 
SKU: 1027314220
Weight63.00 lbs
Retail Price: $217.58
Price: $121.84

Options
 
Quantity Out of stock



  44%
 

  Detailed images
FLOOD FLD142 SWF-SOLID DEEP BASE 250 VOC SIZE:5 GALLONS.

 

  Recommended products list
  • UGL 26712 ZAR SATIN EXTERIOR POLYURETHANE SIZE:QUART.
  • NORTON 01294 9" X 11" 400A TUFBAK DURITE WATERPROOF PAPER PACK:50 PCS.
  • NORTON 48335 3 2/3" X 9" ASST SANDER SHEET HANDY PACK:10 PCS.
  • ASR 66-0078 3 NOTCH UTILITY BLADES 100 PACK .025
  • PURDY 644091 9" PARROT 1/4" NAP
  • RUSTOLEUM 77518 7751830 SPRAY PAINT HIGH HEAT ENAMEL SPRAY WHITE SIZE:12 OZ. SPRAY PACK:6 PCS.
  • TYCO C0620 6 MIL 20' X 100' CLEAR POLY FILM
  • OLD MASTERS 48201 SEMIGLOSS 350 VOC COMPLIANT POLY PLASTIC POLYURETHANE SIZE:1 GALLON.
  • VARATHANE 00608 6081 SPRAY CLEAR SEMI GLOSS INTERIOR CLASSIC (OIL) SIZE:11.25 OZ. SPRAY PACK:6 PCS.
  • ZINSSER 249054 DIF QUICK WALLPAPER STRIPPER SIZE:1 GALLON.
  •  
     

     
     
         Your cart
    Cart is empty

    View cart
    Checkout


         Authentication
    Username

    Password

    Log in
    Register
    Recover password

    If Javascript is disabled in your browser click here


         News
    06-29-2018

    ONLINE BUSINESS FOR SALE-DISCOUNTPAINT.NET:$19,000.00 (WAS $24,998.75)

    FOR DETAILS CLICK HERE

    BUY NOW AND SAVE UP TO 20%!



    Previous news


     


     
     
    We accept major credit cards
    Credit Cards Logo
     
    Home - Store - Company - Search - Policies - Contact Us - Site Map - Directory - Resources - Blog - News
    Painting Supplies
    - Decorative Paint - Metallic Paints - Paint - Paint Removers & Sealants - Stain - Finish
    Paint
    - Metallic Paint - Venetian Plaster - Metal Paint - Ready Strip - Paint Supplies - Minwax - Paint Store - Paint Colors
     
     
    SEO by site SEO 


    © Copyright 2002-2015 DiscountPaint.net - All Rights Reserved