SURFACE PREP
New Wood: Sand smooth using fine sandpaper. Remove sanding dust with tack rag or cloth dampened with paint thinner or mineral spirits.
Old Finishes in Good Condition: Remove grease, dirt and wax. Sand lightly in the direction of the grain to remove any gloss. Clean and remove dust as above.
Old Finishes in Poor Condition: Remove completely. Sand and remove dust as above.
As a wood conditioner for bare soft and porous wood: For a uniform wood stain appearance, prior to staining bare soft and porous wood such as fir, pine, lauan and aspen, wipe on a coat.
Wait 5-10 minutes, then wipe off excess. Apply stain within 2 hours.

APPLICATION
Apply when air and surface temperatures are above 50°F. Stir before and during application. Do not shake! Do not thin. Apply straight from the can. Apply using a clean lint-free cloth (an old tee shirt works well). Do not use a roller.

DRYING
Allow to dry 6-8 hours depending on temperature, humidity and film thickness. If while sanding, sandpaper gums or surface feels tacky, extend drying time.

CLEAN-UP
Clean immediately after use with paint thinner or mineral spirits.

COVERAGE
Up to 800 sq. ft. per quart.