Cabot Clear Solution 3000 Series is specially formulated with a unique
blend of resin and oil to provide a superior natural finish for bare
wood. This distinctive product not only sustains the natural beauty
of exterior wood, it also provides excellent wood penetrating protection
against the sun and all damaging weather elements. It’s water-repellent,
to keep moisture out and guard against wood warping and checking. Easy
to apply and requiring just one coat, Cabot Clear Solution slightly
darkens wood when first applied leaving a flat and translucent amber-toned
finish. The finish then slowly weathers with time to a natural wood
hue depending upon the particular wood type on which it was applied.
Cabot Clear Solution is for use on new or reconditioned wood only, including
decks, siding, shingles, shakes, trim and on log homes. Cabot Clear
Solution can be applied to all natural wood species such as cedar, fir,
pine, cypress, spruce and redwood and will produce outstanding results
on all premiumgrade lumber. It can also be applied to pressure-treated
Deep-penetrating, clear product, based on refined natural linseed oil
modified with alkyd resin.
Dries to a flat, translucent-toned finish.
On smooth surfaces, approximately 400-600 square feet per gallon; on
rough surfaces, 150-250 square feet per gallon. These rates will vary
depending upon the porosity of the surface.
Do not thin this product. Do not tint this product. Do not apply over
hardboard, siding, previously stained, painted or sealed surfaces or
adjacent to fresh stucco. For these areas and on hardboard siding, Cabot
PRO.V.T.® and The Finish House & Trim Paint are recommended.
Not intended for interior surfaces. For exterior use only.