ZAR®
TUNG OIL WIPE-ON FINISH
A
durable bar top finish that resists ring marks caused by hot or cold
beverages. Apply with a cloth to furniture, paneling, cabinets, doors
and antiques.
DESCRIPTION
ZAR Tung Oil Wipe-On Finish wipes on with a cloth for a beautiful finish
every time. Fortified with polyurethane, ZAR Tung Oil Wipe-On Finish
is ideal for bartops, furniture, paneling, cabinets, woodwork, spindles
and antiques. Resists ring marks caused by hot, cold or alcoholic beverages.
A damp cloth renews the finish. Child safe when dry. ZAR Tung Oil Wipe-On
Finish can also be used as a one coat wood conditioner for bare, soft
or porous wood to achieve a uniform stain appearance.
SURFACE
PREP
New Wood: Sand smooth using fine sandpaper. Remove sanding dust
with tack rag or cloth dampened with paint thinner or mineral spirits.
Old Finishes in Good Condition: Remove grease, dirt and
wax. Sand lightly in the direction of the grain to remove any gloss. Clean
and remove dust as above.
Old Finishes in Poor Condition: Remove completely. Sand
and remove dust as above.
As a wood conditioner for bare soft and porous wood: For a uniform wood
stain appearance, prior to staining bare soft and porous wood such as
fir, pine, lauan and aspen, wipe on a coat.
Wait 5-10 minutes, then wipe off excess. Apply stain within 2 hours.
APPLICATION
Apply
when air and surface temperatures are above 50°F. Stir before and
during application. Do not shake! Do not thin. Apply straight from the
can. Apply using a clean lint-free cloth (an old tee shirt works well).
Do not use a roller.
DRYING
Allow to dry 6-8 hours depending on temperature, humidity and film thickness.
If while sanding, sandpaper gums or surface feels tacky, extend drying
time.
CLEAN-UP
Clean immediately after use with paint thinner or mineral spirits.
COVERAGE
Up
to 800 sq. ft. per quart.
|
