Recommended Uses:
Cabot Weathering Stain #3244 Silver Gray is a deep penetrating, oil-based stain that beautifies and protects exterior wood.This lightly pigmented stain will create an immediate natural silver gray “weathered” look while allowing the grain, texture and color variations within the wood to show through. This stain is water repellent and, when properly applied, will not crack, peel or blister. Weathering Stain is for use on exterior wood siding, shingles, shakes,
fences, log homes and roofs. It is especially effective on rough-sawn surfaces and excellent results are obtained on premium grade lumber such as cedar, fir, pine, cypress, spruce, redwood and plywood panel siding.

Composition:
Lightly pigmented, deep-penetrating, refined natural linseed oil-based stain.

Finish:
Dries to a natural, flat finish.

Coverage:
On smooth surfaces, approximately 400-600 square feet per gallon; on rough surfaces, 150-300 square feet per gallon. These rates will vary depending upon the porosity of the surface.

Restrictions:
Do not apply over previously painted or sealed surfaces, metal, masonry or adjacent to fresh stucco. For these areas and on trim, The Finish House & Trim Paint or Cabot PRO.V.T® Solid Color Acrylic Stains are recommended. Do not use on decks or other horizontal surfaces. Cabot Decking Stains, as well as Cabot Solid Color 100% Acrylic Decking Stains #1800 should be used. Do not thin this product. Do not tint this product. Not intended for interior surfaces. For exterior use only.