A high-quality, durable clear finish that combines polyurethane protection with a classic hand-rubbed beauty. It's easy to apply. Just wipe it on with a cloth - no need to worry about drips or brush marks. Water Based Wipe-On Poly is a great choice for any project, especially furniture, railings and trim.

1.Surface must be dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt or other foreign matter.
2.Sand to obtain a smooth uniform surface. Do not use steel wool. Remove all dust with a damp cloth.
3.If desired, apply stain, such as Minwax® Wood Finish™, following the label directions for application instructions and dry times.
4.Shake Water Based Wipe-On Poly container thoroughly before use.
5.Put liberal amount Water Based Wipe-On Poly on a clean, soft, lint-free cloth and rub into the wood.
6.Allow to dry at least 2-3 hours. Sand entire surface lightly with fine sandpaper (220 grit). Remove all sanding dust.
7.Apply a second coat in the same manner as the first. A third coat is recommended. Repeat Step 6 before application.
8.Allow final coat to dry 24 hours before normal use.

Floors: Water Based Wipe-On Poly may be used to touch up small scratches on floors. Apply carefully as gloss level may not be identical to existing floor finish.

Note: Water Based Wipe-On Poly is not recommended for general use on floors. To protect floors, use Minwax® Water Based Polyurethane for Floors or Minwax® Water Based Polyurethane.

Cleanup: For easy cleanup, use warm water.

Coverage: Approximately 125 sq. ft. per quart.