Recommended Uses:
Cabot Clear Solution 3000 Series is specially formulated with a unique blend of resin and oil to provide a superior natural finish for bare wood. This distinctive product not only sustains the natural beauty of exterior wood, it also provides excellent wood penetrating protection against the sun and all damaging weather elements. It’s water-repellent, to keep moisture out and guard against wood warping and checking. Easy to apply and requiring just one coat, Cabot Clear Solution slightly darkens wood when first applied leaving a flat and translucent amber-toned finish. The finish then slowly weathers with time to a natural wood hue depending upon the particular wood type on which it was applied. Cabot Clear Solution is for use on new or reconditioned wood only, including decks, siding, shingles, shakes, trim and on log homes. Cabot Clear Solution can be applied to all natural wood species such as cedar, fir, pine, cypress, spruce and redwood and will produce outstanding results on all premiumgrade lumber. It can also be applied to pressure-treated wood.

Composition:
Deep-penetrating, clear product, based on refined natural linseed oil modified with alkyd resin.

Finish:
Dries to a flat, translucent-toned finish.

Coverage:
On smooth surfaces, approximately 400-600 square feet per gallon; on rough surfaces, 150-250 square feet per gallon. These rates will vary depending upon the porosity of the surface.

Restrictions:
Do not thin this product. Do not tint this product. Do not apply over hardboard, siding, previously stained, painted or sealed surfaces or adjacent to fresh stucco. For these areas and on hardboard siding, Cabot PRO.V.T.® and The Finish House & Trim Paint are recommended. Not intended for interior surfaces. For exterior use only.