GLAZOL® GLAZING COMPOUND
Superior to putty for replacing broken glass in wood or metal sash, or for filling cracks and nail holes in wood siding. Can also be used to set plumbing fixtures.

DESCRIPTION
Superior to putty, Glazol may be used for glazing wood or metal sash, setting plumbing fixtures and filling cracks and nail holes. Glazol remains pliable, does not chip or crack and has year-round workability. Glazol forms a “cushion” against shock and vibration when used in replacing broken glass and is ideal for use as a knife-grade compound.

SURFACE PREP
Remove old putty and make sure surface is clean and dry. Air and surface temperature should be above 40°F. For best results, window frames should be primed with a good oil-base primer. For bedding glass, if desired, soften Glazol slightly with a small amount of mineral spirits. When installing glass into frame, secure with glaziers points or clips.

APPLICATION
Glazol is ready to use. Place Glazol in hands and roll to warm and soften. Apply with putty knife using flat side of blade against material, not the bottom edge. Press Glazol onto sash, filling height and width of L-shaped recess completely. Smooth to an angle that sheds rain. For best results, Glazol should be painted after it is applied. When used under latex paint, allow Glazol to cure for several days before painting. Before painting with oil-based paint, allow Glazol to dry overnight.