Recommended
Uses:
Cabot® Solid Color Oil Decking Stains combine maximum color and
U.V. protection with a tough alkyd resin. The results are a completely
opaque finish that imparts lasting beauty for deck surfaces. Containing
100% alkyd resin, these solid color stains are extremely durable and
are formulated to withstand foot traffic and wear. Cabot Solid Color
Oil Decking Stains are excellent for use on most types of exterior wood
decking, including pressure-treated pine, red and white cedar, fir,
cypress, redwood and on hardwoods such as mahogany, cambara, meranti
and other exotic wood species.
Composition:
Special blends of alkyd resins along with all-natural pigments.
Finish:
Dries to a uniform opaque finish.
Coverage:
On smooth surfaces, approximately 400-500 square feet per gallon (9.8-12.3
square meters per liter); on rougher surfaces, 250-350 square feet per
gallon (6.1-8.6 square meters per liter). These rates will vary depending
upon the porosity of the surface.
Restrictions:
Do not apply in direct sunlight, to hot surfaces, or when air or surface
temperature is below 50°F or may fallbelow 50°F for 48 hours
after application. Do not apply over wet or damp surfaces or when rain
is imminent. Do not apply adjacent to fresh stucco and masonry. Do not
apply over water-based products. Do not thin this product. Not recommended
for use on Incense Cedar. Not intended for interior surfaces. For exterior
use only. To ensure desired appearance and proper drying time, always
finish a small test area before proceeding.