Paint
Paint
DiscountPaint.net
The Best Place on the Net to Buy Paint and Painting Supplies
Store Front Company Policies Contact Us Search
Paints Painting Supplies Decorative Paints
Printable version 
 
     Categories
MANUFACTURERS
DECORATIVE PAINTS
PAINTS
PAINTING SUPPLIES
PAINT COLOR SAMPLES
COLOR EXPERT
COLOR MATCHING
VOC COMPLIANT PRODUCTS
FREE SHIPPING SPECIALS
OVERSTOCK SPECIALS


     Manufacturers
MODERN MASTERS
HAMMERITE
ZINSSER
MAJIC PAINTS
UGL
ADVANCE PROTECTIVE PRODUCTS
MINWAX
XIM
SHEFFIELD
OKON

Other manufacturers...


     Special
Gift certificates
Special offers

     Help
Contact us
Privacy statement
Terms & Conditions
About Us
Repainting your Exterior Home
Interior Paint Project
Why Use Color Samples Before You Paint?
Blog
Sitemap

  DiscountPaint.net :: MANUFACTURERS :: XIM :: XIM 60382 #54020 TILE DOC KIT ( CONTAINS 1 PINT A & 1 PINT B )

  XIM 60382 #54020 TILE DOC KIT ( CONTAINS 1 PINT A & 1 PINT B )
XIM 60382 #54020 TILE DOC KIT ( CONTAINS 1 PINT A & 1 PINT B ) 

Tile DOC® White: Product Number 4201
Solvent Borne Finish for Porcelain and Ceramic, VOC: less than 380 g/l

• For refinishing tubs, sinks, and shower areas

• For ceramic, porcelain, tile, cement, Formica, fiberglass, rigid acrylic

• Two component acrylic modified epoxy

• Holds up to Hot Soapy Water without failing

• Xylene clean-up

• Interior applications only

• Tintable to pastel colors with universal tints

• DL Labs Tests show that Tile DOC out performs competitive

Product Description: XIM’s Tile DOC is an Engineered two component finish that bonds strongly to porcelain and will hold up to cold and hot water. The Tile-DOC is a gloss white that looks just like tile. It can be used as a white or tinted to a pastel color. Product Preparation: XIM’s Tile DOC Part A should be mixed before combining with Part B. Part A and Part B must be mixed together before use. Mix by stirring, not shaking. The mixing ratio is 1 part A to 1 part B. (1:1) The mixing ratio is critical. Too much part A will result in a film that is too brittle, and too much part B will result in a film that is too soft and will mar more easily. No reduction is needed. If reduction is needed for spraying, however, small amounts of XIM’s Reducto, xylene or lacquer thinner can be added, not to exceed 1/2 ounce per gallon. After mixing, strain. No waiting period or “sweat-in” period is required before using. The pot life of the mixture is about 14-18 hours, depending on the temperature and the humidity. It is recommended that you thoroughly rinse and clean your application equipment immediately after use. If tinting is desired use universal tints to achieve pastel colors. Do not exceed two ounces of tint per mixed gallon. (½ oz per mixed quart) You can tint part A or tint the mixture of Part A and Part B. Note: Mix only what you will use that day. Keep the containers tightly closed when not in use. Store at room temperature.

Clean-Up: Clean equipment with xylene or lacquer thinner immediately after use. Do not allow the mixed finish to remain in the spray gun or application equipment.

Surface Preparation: Careful surface preparation and cleaning is the key to a good result. Repair all cracks, chips and broken areas with a top quality epoxy filler. After all repairs are made be sure the surface is thoroughly clean and dry, free from all dirt, grease, wax, oils, soap film, mildew, rust or other contaminants. Soap residues are not easily seen, but must be removed completely. Take extra precautions to clean the surface areas around the drain and soap dish. The first step is to clean the surface of the porcelain or tile with a strong abrasive detergent using an abrasive pad or steel wool. Rinse well and dry. Next, solvent wiping of the surface is recommended. Wipe down the surface with XIM GON Cleaner or xylene. Do not use mineral spirits, turpentine or solvents that will leave oily residues. For the optimum adhesion, dull the surface with XIM’s brush-on etching cream, Etch-I-M, a commercial mild acid etch recommended for dulling porcelain and ceramic glaze. Follow the Etch-I-M instructions for use and safe handling. After etching, rinse well with water to remove the etching residue and etching cream then dry with a clean, lint free cloth. You can also scuff the surface with sand paper (180 to 220 grit Silicon Carbide paper is recommended). Be sure to remove all sanding dust. To fill cracks and chips use an epoxy filler recommended for patching porcelain, such as PC 11 (supplied by Protective Coatings Products) or equivalent. When coating cement or concrete wash tubs, clean as described above and do the etching with mild muriatic acid solution, rinse well and allow to dry completely. Again, follow the acid etch manufacturer’s instructions for use and safe handling. Rinse well with water and dry with a clean, lint free cloth. If desired, the grout can be sealed first with a masonry sealer such as XIM”s 600 Clear Masonry Sealer. When sealed first, the Tile DOC will dry to a gloss in the grout areas with two coats. When preparing for spray application, be sure to tape-off all fixtures, trim and areas not to be painted. Cover floors and cabinets with drop cloths to protect from over spray. Remove all silicone sealers or caulks from seams and edges before application of the Tile DOC. Re-caulk 1-2 days after application of the Tile DOC. For previously coated surfaces, we recommend complete stripping / removal of the existing coating before proceeding. If you apply the Tile DOC over old coatings, you run the risk of the old coating still Peeling. For bare steel, remove all rust and prime or spot-prime with a two component rust inhibiting epoxy primer before applying the Tile DOC.

How to Apply: After mixing apply by spray application for the smoothest “tile-like” appearance. Spraying can be by conventional air sprayer, HVLP, or airless sprayer. If you do not have access to spray equipment, a Crown sprayer or a Preval Sprayer, which is manufactured by Precision Valve Corp. work well. These are available at most stores where paint is sold. See the spray gun manufacturer’s recommendations for tips and pressure settings. Apply at temperatures between 50 deg. F and 100 deg. F (both the surface and surrounding air). When spraying we recommend multiple, light “mist-coats” rather than heavy coats that might sag. Under standard conditions (77 deg. F and 50% relative humidity) the XIM Tile and Porcelain Finish will dry to touch in several hours. Thicker coats will take longer to dry. Spray Gun Usage: When applying with spray gun equipment, vapors can build up rapidly and may cause flash fire. With all applications: vapors may travel to areas away from the work site and ignite; use only where moving air will carry vapors outside. Ground all equipment. Do not use where static electricity can build up and cause sparks. If brushing, use a fine bristle brush and lightly brush-out in one direction for a smooth surface. If brush marks remain, use the feathering technique. About three hours after application, lightly dampen a fine bristle brush with xylene or lacquer thinner, and shake out any excess from the brush. Brush in one direction by lightly tickling the surface to re-flow the brush marks. We recommend two coats for maximum performance. If the second coat remains tacky, improve ventilation to promote drying. The XIM Tile DOC Finish will generally harden in 24 to 36 hours. If you apply the second coat within 4-6 hours, no sanding of the first coat is needed. If you have waited until the first coat has hardened or you are repairing or touching up a damaged area, lightly scuff-sand the first coat with 400 grit sandpaper or fine steel wool to “dull” the surface. Remove all sanding dust before proceeding. After applying the second coat, water should be kept away from the XIM Finish for a period of three to four days. Note: The XIM Finish is hard and should only be applied over hard, firm surfaces. Do not apply over flexible seams or caulk. Note: Hiding/Block Out --- Tile DOC is a gloss white finish designed for thin film application. When applied over dark colors or surfaces composed of both dark and light colors, complete hiding (Block Out) of the colors may not be achieved in only one or two coats. If you are painting over dark colors consider the following: (1) Multiple coats may be required, (2) Consider tinting the Tile DOC to an off-white or pastel color or (3) Consider tinting the first coat of Tile DOC to an off-white or pastel color followed by a white second coat.

Maintenance and Repair: XIM’s Tile DOC Finish cures to a very hard and durable coating. With proper care the XIM Tile DOC Finish will last up to 10 times as long as regular enamels. Always clean the XIM Tile DOC Finish with a “soft-scrub”, non-abrasive type cleaner or a mild detergent cleaner like 409 or Fantastic. Do not use chlorine based cleaners or bleach which can cause discoloration. If the surface becomes dull the Tile DOC Finish can be buffed back to a gloss using a Polishing Compound. Since the Tile DOC Finish is similar to porcelain it can be chipped like porcelain when struck with hard objects. To repair a chipped or scratched area, fill the chip or scratch with an epoxy filler, clean the area with a solvent wipe, scuff sand with 220 to 400 grit sand paper, re-wipe with solvent and touch up the area with the XIM Tile DOC Finish. Note: Some alcohol based beauty care products may stain the tile DOC surface if left in contact.

Estimated Square foot coverage for the Tile DOC Finish

Square foot Coverage

Mixed Gallon

Mixed Quart

Mixed Pint

One Coat @ 1 mil dry

800 sq. ft.

200 sq. ft.

100 sq. ft.

Two Coats @ 1 mil each (2 mils total)

400 sq. ft.

100 sq. ft.

50 sq. ft.

 
   

Details
 
SKU: 2359660382
Weight5.00 lbs
Retail Price: $65.30
Price: $43.75

Options
 
Quantity Out of stock



  33%
 

  Send to friend
Your name: *
Your e-mail: *
Recipient's e-mail: *

 Send to friend 
 

  Detailed images
XIM 60382 #54020 TILE DOC KIT ( CONTAINS 1 PINT A & 1 PINT B )

 

  Recommended products list
  • FAMOWOOD 21106 #36021106 BIRCH WOOD FILLER SIZE:PINT.
  • MODERN MASTERS METALLIC PAINT 99847 ME-289 BRASS SIZE:6 OZ.
  • WOOSTER R205 SUPER DOO-Z ROLLER COVER SIZE:4" NAP:3/8" PACK:24 PCS.
  • ASM 356-SF HT 300 GUN 2 FINGER WITH BASE
  • NORTON 27933 3" X 24" 100X RESIN BELT BULK ( REPLACED 21745 ) PACK:10 PCS.
  • GEMINI TWP116-5 TOTAL WOOD PRESERVATIVE RUSTIC SIZE:5 GALLONS.
  • PURDY 296030 3" OX-O ANGULAR
  • OLD MASTERS 41901 RED MAHOGANY 250 VOC COMPLIANT PENETRATING STAIN SIZE:1 GALLON.
  • VARATHANE 12803 211713 TRADITIONAL PECAN 218 OIL STAIN SIZE:QUART.
  • RUSTOLEUM 246068 TINT BASE COUNTERTOP COATING SIZE:QUART.
  •  
     

     
     
         Your cart
    Cart is empty

    View cart
    Checkout


         Authentication
    Username

    Password

    Log in
    Register
    Recover password

    If Javascript is disabled in your browser click here


         News
    06-21-2014
    Sorry. Checkout is currently unavailable. We will not be able to ship any merchandise.Our main supplier cut us their services with out any notice in advance. We are trying to solve this situation looking for another supplier. We are leaving alive the catalog for informational purposes. We apologize for any inconvenience this may cause to you. Thank you DiscountPaint.net

    Previous news


     


     
     
    We accept major credit cards
    Credit Cards Logo
     
    Home - Store - Company - Search - Policies - Contact Us - Site Map - Directory - Resources - Blog - News
    Painting Supplies
    - Decorative Paint - Metallic Paints - Paint - Paint Removers & Sealants - Stain - Finish
    Paint
    - Metallic Paint - Venetian Plaster - Metal Paint - Ready Strip - Paint Supplies - Minwax - Paint Store - Paint Colors
     
     
    SEO by site SEO 


    © Copyright 2002-2014 DiscountPaint.net - All Rights Reserved