Polyurethane Wood Floor Finish-350 VOC
Last•n•Last Professional Polyurethane
Wood Floor Finish combines the beauty and durability of 100% pure polyurethane
with Microban antimicrobial protection. The Professional’s Choice
for over 40 years, Last•n•Last is the premium quality wood
finish. Manufactured from the highest quality resins, Last• n•
Last will provide years of outstanding beauty and durability on most
wood surfaces. Adhesion is excellent – resists flaking and chipping.
For interior use only. Not recommended for coating over white surfaces.Last•·n•Last
Professional Polyurethane Wood Floor Finish is designed to be used on
all types of wood, including floors, stairs, moldings, furniture, and
crafts. Microban protection is built into this coating. It will not
wash off or wear away for the life of the finish.
Last•·n•·Last Professional Wood Floor Finish
is recommended for most interior commercial and residential wood.
Color in Container: Gloss - Clear; Satin – Hazy; Semi-Gloss –
Solids Content/weight: Gloss – 57-60%; Satin – 53%-57%;
Semi-Gloss – 53%-57%
Chemical Resistance: Excellent
VOC: VOC does not exceed 350 grams/liter
Flash Point: 105°F
Sheen Gloss: No less than 90 units on wood.
Satin: 25-35 units on wood.
Semi-Gloss: 50-60 units on wood.
Freeze/Thaw Stability Stable
Shelf Life: Unlimited in unopened container.
Drying Time: 4-6 hours under good condition conditions
Cleanup: Mineral Spirits, Paint Thinner, Turpentine.
Application method: Lambswool applicator, natural bristle brush
Coverage Approx: 500-600 sq feet per gallon on raw wood.
surface preparation is essential to achieve a high quality finish. Read
the MSDS sheet and wear proper protection, which may include gloves,
eye protection, and/or other protective devices.
New or Newly Sanded Floors or Wood Surfaces: Prepare the floor according
to NWFA or NOFMA accepted standard. The final pass before application
of Last•n•Last Professional Polyurethane Wood Floor Finish
and sealer should be a #100 to #150 grit screen pad or sandpaper. Remove
dust completely by sweeping, vacuuming and wiping the floor or work
surface with a lint free cloth lightly dampened with mineral spirits.
Avoid using filler that contain stearate or wax. The floor or work surface
and room temperature should be at least 65°F.
Previously finished Floors or Wood Surfaces: Remove old finish in poor
condition. Screen the work surface with a #100 to #150 screen disc,
#180 grit sand paper, maroon pad or similar. Remove dust completely
by sweeping, vacuuming and wiping the floor or work surface with a lint
free cloth lightly dampened with mineral spirits. . Avoid using filler
that contain stearate or wax. The floor or work surface and room temperature
should be at least 65°F.
TO STIR THIS PRODUCT BEFORE AND DURING USE. SATIN AND SEMI-GLOSS CAN
BE SHAKEN. AFTER SHAKING, LET IT SIT FOR 10 MINUTES.
Apply the finish with the grain of the wood. Apply in well ventilated
area by brush, roller, spray, or lambswool applicator at room temperature
and not in direct sunlight. When using a roller, work slowly to avoid
air bubbles. Screen the floor or work surface in between coats with
any of the following #150 screen disc, #180 grit sand paper, maroon
pad or similar in between coats. Remember to vacuum and tack thoroughly
after screening to remove all dust. Heavy finish application, high humidity
or lack of airflow will extend drying times. If waiting longer than
24 hours between coats, sanding is recommended.
Last•n•Last Professional Polyurethane Wood Floor Finish
should adhere well to most stain, but a test for adhesion over brands
other than Last•n•Last stain is recommended. Use Last•n•Last
Classic Wood Stain following instruction on label. Allow to dry a minimum
of 24 hours under good conditions. Make sure the stain is completely
dry before applying the Finish.
When applied according to directions, and in thin coats, Last•·n•·Last
Professional Polyurethane Wood Floor Finish should be dry to the touch
in 4-6 hours.Allow minimum of 6 hours between coats. Heavy finish application,
high humidity or lack of airflow will extend drying times. Last·n·Last
Clear Polyurethane Wood Finish completely cures within 2 weeks.
up: Use paint thinner, mineral spirits or turpentine to clean
brushes and applicators.
Last·n·Last Professional Polyurethane Wood Floor Finish
never needs waxing. We recommend Polycare Floor Cleaner as the safe
and effective cleaning product for all polyurethane coated surfaces.
It has a unique soap-free, no rinse formula which will not harm polyurethane
or varnished wood surfaces.