Cabot Semi-Transparent Acrylic Stains combine the penetrating properties
of traditional oil-based stains with the easy soapand- water clean-up
of water-based finishes. These stains are specially formulated to provide
long-lasting, vapor-permeable protection that beautifies and enriches
exterior wood surfaces. Containing a special acrylic resin, these products
are ideal for all types of natural wood siding, shingles, roofs and
log homes. Superior ultra-violet protection is achieved through the
use of non-fade, earth-tone pigments, in addition to a superior 100%
acrylic resin. Semi-Transparent Acrylic Stains are formulated to weather
slowly over time –without cracking, peeling or blistering. Cabot
Semi-Transparent Acrylic Stains are formulated for application on new
or properly reconditioned wood, including siding, shingles, shakes,
fences, roofs and on log homes. These beautiful stains provide outstanding
results on all natural wood species such as cedar, redwood, fir, pine,
spruce and cypress, including pressure-treated wood and plywood panel
siding. These stains may also be applied to new, unprimed fiber cement
Deep-penetrating, richly pigmented stains based on 100% acrylic resin.
Dries to a natural, semi-transparent flat finish.
On smooth surfaces, approximately 200-300 square feet per gallon (4.9-7.4
square meters/liter); on rough surfaces, 100-200 square feet per gallon
(2.5-4.9 square meters/liter). These rates will vary depending upon
the porosity of the surface.
DO NOT INTERMIX WITH CABOT OIL-BASED PRODUCTS. Do not apply in direct
sunlight, to hot surfaces, or when air or surface temperature is below
50°F. Do not apply over wet or damp surfaces or when rain is imminent.
Do not thin or combine with any other products. Do not use steel wool
on wood that is to be coated with these products. Do not apply over
previously painted or sealed surfaces. Cure new stucco and masonry products
for a minimum of 30 days before applying Semi-Transparent Acrylic Stains.
This product is not recommended for decks or interior surfaces. For
exterior use only. Protect stored containers from freezing.