Paint
Paint
DiscountPaint.net
The Best Place on the Net to Buy Paint and Painting Supplies
Store Front Company Policies Contact Us Search
Paints Painting Supplies Decorative Paints
Printable version 
 
     Categories
MANUFACTURERS
DECORATIVE PAINTS
PAINTS
PAINTING SUPPLIES
PAINT COLOR SAMPLES
COLOR EXPERT
COLOR MATCHING
VOC COMPLIANT PRODUCTS
FREE SHIPPING SPECIALS
OVERSTOCK SPECIALS


     Manufacturers
MODERN MASTERS
HAMMERITE
ZINSSER
MAJIC PAINTS
UGL
ADVANCE PROTECTIVE PRODUCTS
MINWAX
XIM
SHEFFIELD
OKON

Other manufacturers...


     Special
Gift certificates
Special offers

     Help
Contact us
Privacy statement
Terms & Conditions
About Us
Repainting your Exterior Home
Interior Paint Project
Why Use Color Samples Before You Paint?
Blog
Sitemap

  DiscountPaint.net :: MANUFACTURERS :: XIM :: XIM 10631 #11431 PLASTIC AND VINYL PRIMER HIGH SOLIDS SIZE:1 GALLON PACK:4 GALLONS.

  XIM 10631 #11431 PLASTIC AND VINYL PRIMER HIGH SOLIDS SIZE:1 GALLON PACK:4 GALLONS.
XIM 10631 #11431 PLASTIC AND VINYL PRIMER HIGH SOLIDS SIZE:1 GALLON PACK:4 GALLONS. 

Plastic & Vinyl Bonding Primer White: Product Number 1143
Solvent Born, Bonding Primer Sealer, VOC: less than 450 g/l

• Properties of both a primer and an adhesive

• Makes paint stick to plastics including PVC, Lexan, ABS, polypropylene and TPO

• Quick drying

• Top coat with most all types of paint in hours

• Tintable to pastels with universal tint colors.

Description: XIM’s Plastic & Vinyl Bonding Primer is formulated to bond strongly to a wide range of plastic & vinyl materials used in home and building construction. When applied to a clean surface, it will allow painting. Generally, plastic & vinyl materials and molded parts could not be painted with long term confidence. When the XIM Plastic & Vinyl Bonding Primer is used, regular oil-base alkyd paints, waterbased latex paints, 2K urethanes and 2K epoxy paints can be used to paint materials made of many plastics.

Product Preparation: XIM’s Plastic & Vinyl Bonding Primer is ready to use directly from the container. No thinning or reduction is required. Mix well before application. It may require extra time on different shakers to fully mix in any settled materials. Note: Keep the containers tightly closed when not in use. Store at room temperature.

Clean-Up: Clean equipment with mineral spirits, xylene or lacquer thinner immediately after use. Do not allow the mixed finish to remain in the spray gun or application equipment. Spray Gun Usage: When applying with spray gun equipment, vapors can build up rapidly and may cause flash fire. With all applications: vapors may travel to areas away from the work site and ignite; use only where moving air will carry vapors outside. Ground all equipment. Do not use where static electricity can build up and cause sparks.

Clean-Up: Clean equipment with XIM GON Cleaner, xylene, or lacquer thinner immediately after use.

Surface Preparation: Careful surface preparation and cleaning is the key to a good result. Be sure the surface is thoroughly clean and dry, free from all grease, wax, oil, polish, loose paint and dirt. Clean with a strong abrasive detergent, rinse well and allow to dry. Rough surfaces should be sanded smooth. Moldy or mildewed surfaces should be scrubbed with a mixture of one quart of household bleach and three quarts of water and then thoroughly rinsed with clean water. (Never mix bleach with detergents - particularly detergents containing ammonia.) Solvent wiping also recommended. Wipe down the surface with XIM GON Cleaner or Xylene. Do not use mineral spirits, turpentine solvents that will leave oily residues. Note: Some plastics are attacked by solvents - always check a small area before proceeding.

How to Apply: Use brush, roll or spray. The temperature of the surface and the surrounding air should be between 50 deg. F and 100 deg. F. They dry to touch in about 20-30 minutes under standard conditions (77 deg. F and 50% relative humidity). Thicker coats will take longer to dry. When using brush or roller, avoid excessive brushing or rolling because the Bonder can tack the applicator to the recently applied Bonder. Work in small areas and apply evenly. If an area is missed, wait a few minutes until the bonder has dried before touching up. To slow down the drying rate, small amounts of XIM’s XS Retarder or mineral spirits can be added. It can be top-coated within 1 hour. See the table below for top coat recommendations. Full cure is achieved in about 48 hours. For conventional spray use Binks 62 gun, 66 fluid nozzle, 63 PB air nozzle, or equivalent, at 40 to 60 psi atomization pressure. For airless spray application use .015 to .019 orifice, 60 mesh strainer and 2000 psi fluid pressure. For HVLP an internal pressure of 8 to 10 psi can be used. It is best to apply the Bonding Primer in several light to medium coats rather than one heavy coat. XIM Plastic & Vinyl Bonding Primer will generally harden in 24 hours. If faster cure and hardening is desired they can be force dried. NOTE: Recycled plastics, as well as plastic additives such as mold release agents, flow additives, flame retardants, etc. can affect primer adhesion. Because there are many types of plastics and composite materials always test a sample for acceptable adhesion before starting the job.

Plastics Application Chart

Plastic Materials
Recommended
Common
Name
Examples of Trade Names
Acrylonitrile Butadine Stryene ABS Various
Methyl Methylacrylate Acrylic Plexiglas®, Acrylite®, Lucite®, Crylex®
Cellulose Acetate Buterate CAB Various
Fiberglass FPR Fiberglas®
Nylon ---------
Various
Phenylene Oxide --------- Noryl®

Polycarbonate
PC Hyzod®, Tuffax CM-2, Lexan® MR-4000, Zelux®, Coex®
Polyester --------- Mylar®, Haysite®, Homalite®
Polypropylene PP Plasticore®, Trovidur®
Polystryene PS Styrolux®, Rexolite®
Polyurethane PU Various
Polyvinyl Chloride PVC Sintra®, Trovicel®

Thermoplastic Olefin
TPO Always test TPO for acceptable adhesion - May be polyethylene or a blend
Not Recommended
Fluorocarbon/Fluoropolymer PFA, PTFE Teflon®, Kel-F, Halar®, Korton®
Polyvinylidine Fluoride PVDF Kynar®
Polyvinylfluroide PVF Tedlar®
Polyethylene PE Low or High Density Polyethylene
 
   

Details
 
SKU: 2359610631
Weight71.00 lbs
Retail Price: $498.20
Price: $333.79

Options
 
Quantity Out of stock



  33%
 

  Detailed images
XIM 10631 #11431 PLASTIC AND VINYL PRIMER HIGH SOLIDS SIZE:1 GALLON.

 

  Recommended products list
  • KRYLON 05845 SPRAY CONTRACTOR FIREBOX BLACK PAINT SIZE:16 OZ. SPRAY PACK:6 PCS.
  • WOOSTER R017 SHERLOCK ROLLER FRAME SIZE:7" PACK:6 PCS.
  • ASM 69-623 UNI TIP
  • SAVOGRAN 10621 TSP HEAVY DUTY CLEANER POWDER SIZE:1 LB.
  • RUSTOLEUM 19798 1979830 SPRAY PAINT GLOSS BLACK PAINTERS TOUCH SIZE:12 OZ. SPRAY PACK:6 PCS.
  • MESSMER'S 00131 EXTERIOR UV PLUS WOOD FINISH SEMI TRANS CHARCOAL GREY SIZE:5 GALLONS.
  • NOXON 32R12-1 TWO BIT SNAPPER 1/32 X 2/32 NAIL SET
  • DUTCH BOY 20308 503311 WHITE INTERIOR SEMI GLOSS LATEX SIZE:2 GALLONS.
  • CUSTOM PAINT COLOR MATCHING INTERIOR WATER BASE EGGSHELL SIZE:1 GALLON.
  • VALSPAR 26929 COLOR STYLE INT LATEX SATIN CLEAR BASE SIZE:1 GALLON.
  •  
     

     
     
         Your cart
    Cart is empty

    View cart
    Checkout


         Authentication
    Username

    Password

    Log in
    Register
    Recover password

    If Javascript is disabled in your browser click here


         News
    06-29-2018

    ONLINE BUSINESS FOR SALE-DISCOUNTPAINT.NET:$19,000.00 (WAS $24,998.75)

    FOR DETAILS CLICK HERE

    BUY NOW AND SAVE UP TO 20%!



    Previous news


     


     
     
    We accept major credit cards
    Credit Cards Logo
     
    Home - Store - Company - Search - Policies - Contact Us - Site Map - Directory - Resources - Blog - News
    Painting Supplies
    - Decorative Paint - Metallic Paints - Paint - Paint Removers & Sealants - Stain - Finish
    Paint
    - Metallic Paint - Venetian Plaster - Metal Paint - Ready Strip - Paint Supplies - Minwax - Paint Store - Paint Colors
     
     
    SEO by site SEO 


    © Copyright 2002-2015 DiscountPaint.net - All Rights Reserved