Painter’s China Crackle Enhancer-Light (DP-606) is a light-toned
water-based highlight medium that, when used with darker crackled surfaces,
enhances the crackles in the China Crackle system.
All surfaces should be clean and non-absorbent. Seal porous surfaces
with a clear water based sealer such as Modern Masters® Dead Flat
Varnish or Satin Varnish. (Please see the Dead Flat Varnish and Satin
Varnish Technical Data Sheets for more information.)
Step 1: Apply one coat of China Crackle Basecoat (DP-602) to the surface
with a brush or low-nap roller. Let dry completely, approximately 20
to 40 minutes. Hint: The crackle base coat is dry once it feels slightly
sticky to the touch but leaves no residue on the fingers.
Step 2: Apply one coat of China Crackle Topcoat (DP-604) with a brush.
Apply evenly for a consistently cracked surface. Avoid brushing over
an area twice (this may disrupt the crackle process). Let dry completely,
approximately 1 to 2 hours. Once dry, the surface will be completely
clear. Hint: A blow dryer set to medium heat may be used to speed up
the drying time of steps 1 and 2. Hold the dryer at least 10 to 12 inches
(20 to 30cm) away from the surface.
Step 3: Apply the desired color of China Crackle Enhancer (DP-605, Dark
or DP-606, Light) with a soft clean cloth. Rub the color into the cracks.
While the Enhancer is still wet, wipe the surface clean with a soft
clean cloth. Choose the China Crackle Enhancer-Dark for lighter surfaces,
and China Crackle Enhancer-Light for darker surfaces. Let dry completely,
at least 1 hour.
4 (Optional): Surfaces that will be handled should be protected with
Modern Masters® Dead Flat Varnish or Satin Varnish. Follow the directions
on the varnish container label.
DP606: Approximately 40 to 50 square feet per 4 fl. oz. (3.0 to 4.5
square meters per 118 ml.)
Clean tools, brushes, and equipment with warm, soapy water immediately
after use. Promptly
Wipe up spills and splatters with a damp cloth.